The development of the ADJUSTA SYSTEM has been integral in providing building solutions, approved by leading Engineers and Building Contractors throughout Australia. Formworkers and steelfixers recommend our systems for their ease of installation. The systems provide efficient and superior structural integrity.
ADJUSTA REBAR STARTER SYSTEM IS REGULARLY EXTENSIVE AND ONGOING PRODUCT TESTED BY INDEPENDENT NATA TESTING FACILITIES
- Quality control
- Certification
- Research and development
By fostering long term and ongoing partnerships with manufactures and suppliers alike a quality product is achieved on each and every occasion.
SYSTEMS AND COMPONENTS
ADJUSTA Rebar Starter system consists of Spherical Graphite Cast Iron Anchors, a HDPE rebate former board, 500N grade reinforcing starter bars and re-usable polyurethane board connector plugs.
System available in: 12mm, 16mm, 20mm, 25mm and 32mm.
FERRULES
ADJUSTA System ultimate concrete breakout strength is calculated from the ACI (American Concrete Institute) method for concrete anchorage strength as specified in section AS3600.
REBATE BOARD
The HDPE rebate board is customised to the Engineer’s specified spacing and starter bar layout. It consists of a re-cycled material and is resistant to petrochemicals and heat ensuring its durability and longevity. The length of each board is typically 1.2m in length but can be adapted at the installer’s requests. Each board has three board release half nuts installed to assist with the stripping of the rebate former after pour.
POLYURETHANE PLUG AND O-RING SEALER
These are also manufactured from recycled materials and are durable and re-usable from floor to floor. The O-ring initiative provides a pipe seal around the mouth of the Ferrule during concrete pour and inhibits any grout/slurry intrusion.
REINFORCEMENT BAR — ‘THREADSURE’
The ThreadSURE features a 500N reinforcing steel bar compliant to AS/NZS 4671.2001 standards and the systems Ultimate Tensile Strength has been determined from independent NATA Lab mechanical testing in accordance with AS1381. All bars are epoxy painted with a colour cursor that guarantees full embedment depth of the starter bar and onsite inspection guarantees every starter bar in installed to its fullest extent.